You measure the lot in Beam AI. Your ads never find out you won it.
Beam AI, from Attentive.ai, turns a property address into asphalt, striping, turf and bed quantities in 6 to 48 hours. The takeoff happens after the lead has left your website, though, so Google Ads and Meta only ever see the form fill and can't tell a parking lot you won from a driveway quote. We tie each takeoff and signed contract back to the click that started it.
Free30 minutesNo obligation
Beam AI · what breaks
What goes wrong when Beam AI sits between the ad and the bid
- 01
"Google says I got dozens of leads. I measured a handful."
Every form fill counts the same. Tiny lots, residential driveways and out-of-area requests teach Smart Bidding to find more of them, and the commercial sites worth a takeoff get no extra weight.
- 02
The takeoff and the lead never meet
A Beam AI takeoff starts from a property address, not from the lead record holding the ad click. Once the address is retyped, nobody can say which keyword produced the lots you priced.
- 03
Paying for takeoffs on junk leads
Beam AI charges per takeoff. Ads that bring in sites you'll never win cost you the click, then the measurement.
- 04
Contracts signed long after the click
Property managers can sign a sealcoating or grounds contract months after the first click. Google Ads won't import an offline conversion more than 90 days after the click, so slow wins vanish unless an earlier milestone is reported.
Beam AI · the fix
What changes after we fix it — Beam AI
Campaigns learn from measured sites
"Site measured in Beam AI" reaches Google Ads and Meta when the takeoff is ordered, early in the bid cycle and well inside Google's 90-day import window.
Won contracts reported at their real value
The signed total, priced from your Beam AI quantities, comes back as the conversion value, so you see which campaigns bring big parking lots and which bring patch jobs.
Takeoff spend tied to campaigns
Each takeoff is logged against its source campaign, so measuring cost sits next to ad spend.
Beam AI · architecture
What Beam AI actually lets you hook into
Beam AI measures; it doesn't capture leads. Tracking gets built around it, using what its docs give us.
- 1
Address-based aerial takeoffs
You enter an address and confirm the boundary. Attentive quotes 6 to 48 hours for aerial takeoffs, so the order is a fast quality milestone.
- 2
LMN integration
LMN documents a Beam AI connection under Settings > Integrations. Takeoffs started from Jobsite Measurements sync back as read-only measurements on the client record we tie to the lead. Takeoffs started directly in Beam AI don't sync back.
- 3
Excel, PDF and shareable links
Useful for reconciliation, but none of these formats sends anything to an ad platform.
- 4
Bid management inbox
Beam AI can pull invitations to bid from your email. Those are GC-sourced, so they stay out of ad attribution.
- 5
No documented ad or analytics hooks
Attentive documents no GA4, Google Ads, Meta Pixel, webhook or Zapier connection for Beam AI, so conversions go out from your CRM records.
Beam AI · diagnose
Where tracking breaks around Beam AI, in the order we check
Conversions don't break inside Beam AI. They break at the handoffs on either side.
- 01
Does the click ID land on the lead at all?
We submit a test lot inquiry from an ad-tagged URL and check that the GCLID sits on the record holding the property address.
- 02
Is the takeoff started from the lead's record?
In LMN it must start from Jobsite Measurements on the right client. A takeoff typed straight into Beam AI is cut off from the lead.
- 03
Are GC plan takeoffs mixed in with ad leads?
Blueprint takeoffs from bid invitations get split from address takeoffs on inbound leads.
- 04
Is the won value reaching the platforms?
Signed contracts compared with recorded conversions, property by property.
- 05
Are slow wins falling outside the window?
We count contracts signed more than 90 days after the click and lean on the measured milestone for those.
Beam AI · prove
The QA evidence — Beam AI
Run on a real inbound lead measured in your own Beam AI account.
Source of truth
Your Beam AI takeoff history (addresses and dates measured), matched against the contracts recorded in LMN or your bid log
- A test lot inquiry from an ad-tagged URL, with the click ID on the record that holds the property address.
- A Beam AI takeoff for that address, logged once as a measured event in Google Ads and Meta.
- A won contract reported once, at its signed value, matched to the original click.
- A GC blueprint takeoff confirmed absent from paid-ad conversions.
- Measured sites and won contracts reconciled property by property over a closed window, then again 30 days later.
Beam AI · free audit
What we check in the free audit
- Does the click ID land on the lead at all?
- Is the takeoff started from the lead's record?
- Are GC plan takeoffs mixed in with ad leads?
- Is the won value reaching the platforms?
- Are slow wins falling outside the window?
Checked against
Your Beam AI takeoff history (addresses and dates measured), matched against the contracts recorded in LMN or your bid log
Free30 minutesNo obligation
Beam AI · when not to buy
When you don't need this — Beam AI
Plenty of Beam AI users don't need us, and we'll say so.
- If nearly all your takeoffs come from GC bid invitations and repeat property managers, ad tracking has nothing to learn.
- If you only get a few commercial lot inquiries a month, matching them by hand against your Beam AI takeoff history and won bids works fine.
- If you measure construction plans for subcontract bids, your work doesn't come from search ads.
- If your website form already passes the click ID into LMN and you're uploading won estimates, you may only need a 30-minute check.
Beam AI · what we deliver
The event map around Beam AI
Lead captured with its click ID
Your website form or tracked call, with GCLID, fbclid and UTMs saved before anyone opens Beam AI.
Qualified site
Commercial, in your service area, worth measuring. Marked by your estimator as a secondary signal.
Site measured in Beam AI
Fires when an aerial takeoff is ordered for the lead's address. Re-measures and resubmissions don't count twice.
Bid sent
The proposal priced from the takeoff quantities, with its dollar total.
Contract won
The primary conversion, sent server-side at the signed value and matched to the original click.
Excluded from ad credit
Blueprint takeoffs for GC invitations to bid, renewals of existing maintenance accounts and internal test measurements.
Written guarantee
95%+ tracking accuracy
Measured against Your Beam AI takeoff history (addresses and dates measured), matched against the contracts recorded in LMN or your bid log. Miss it and we keep working at no cost.
From $400 · See packages
FAQ
Beam AI questions, answered
No. Attentive documents no ad-platform, GA4 or Pixel connection for Beam AI, so conversions are sent from the lead and contract records around it.
Same company. Attentive's old Automeasure page now redirects to Beam AI's field-services site, where the aerial paving and landscaping takeoffs live.
Not that Attentive documents. The Beam AI Zapier listings online belong to beam.ai, an unrelated AI-agent company.
Yes. LMN's Beam AI integration syncs takeoffs started from Jobsite Measurements back onto the client, so with the ad click saved there, measured sites and won estimates both tie to the campaign.
As a secondary one, yes. You only pay to measure sites worth bidding, so an ordered takeoff is a strong quality signal that shows up early, long before the contract. The won contract stays primary.
The guarantee covers leads that arrive through your website with an ad click. Contracts signed more than 90 days after the click can't be imported into Google Ads, so the measured milestone carries those.
More on Beam AI
- AI receptionist trackingYour AI receptionist answers every call. Your ads still can't tell which ones bo…
- Reclaim.aiConversion tracking for Reclaim.ai scheduling links
- Avoca AIAvoca AI books the job. Your ads never hear about it.
RELATED GUIDES
Booking tools beside Beam AI, and what their bookings feed
- CompanyCamYour ads count inspections. CompanyCam knows which jobs sold.
- Roofle RoofQuote PROYour RoofQuote PRO lead count doesn't match Google Ads or Meta. We fix that.
- ProjulProjul conversion tracking for remodelers who can't tell which ads sign jobs
- JobNimbusGoogle Ads counts form fills. JobNimbus knows which jobs sold.
- JetbuiltJetbuilt shows the contract. Your ad accounts never hear about it.
- JobTreadJobTread conversion tracking: the proposal gets signed in the portal, and your ads never hear about it
- JoistYour Joist estimates get signed. Google Ads never finds out.
- Foundation SoftwareThe job gets set up in FOUNDATION. Your ad account never learns it was won.
Free · 30 min
Find out which ads bring in the lots you measure
Free30 minutesNo obligation
