Google Ads counts reservations. SiteLink counts move-ins. Which ads actually fill your units?
Google Ads reports a pile of reservations, SiteLink shows far fewer move-ins, and nobody can say which campaign rented which unit. The ad click lives on your facility website while the rental lives in SiteLink, and nothing carries one into the other. We connect them so Google and Meta learn from SiteLink move-ins, whether you run one self-storage facility or a boat and RV storage lot.
Free30 minutesNo obligation
SiteLink · what breaks
What goes wrong with SiteLink and your ads
- 01
Google counts reservations that never move in
Your site fires the conversion when someone reserves a unit, but a SiteLink reservation only holds a unit until it expires. Smart Bidding then hunts for more people who reserve and vanish, and your cost per move-in climbs.
- 02
Rentals show up in SiteLink with no ad attached
Your Storable or Storagely site writes the reservation into SiteLink, but SiteLink's reservation call has no click ID field, only a free-text tracking code. Unless your vendor fills it, the gclid never arrives, and you can see units filling without knowing which keyword or Meta ad set paid for them.
- 03
Phone and counter rentals vanish from the report
A caller who saw your ad gets reserved by the manager inside SiteLink, so no web tag ever fires. Campaigns that make the office phone ring look weak, and budget drifts away from them.
- 04
SpareFoot rentals make the ads look better than they are
SpareFoot's own help says its reservations show up in your full SiteLink reservation list, right beside your own. Upload every move-in to Google and your ads take credit for rentals the marketplace delivered, so cost per move-in looks healthier than it is and budget goes up on the wrong campaigns.
SiteLink · the fix
What you get once SiteLink and your ads agree
Bidding learns from move-ins
Google Ads and Meta receive the SiteLink move-in, valued at the unit's monthly rate, tied to the original click.
Every rental has a channel
Ad click, tracked call, SpareFoot, walk-in: each move-in gets one source, so cost per move-in by campaign finally means something.
Expired reservations stop padding the numbers
Reservations that lapse or cancel stay a soft signal and never count as rentals.
SiteLink · architecture
What SiteLink actually lets you hook into
SiteLink documents no Google Ads or Meta connection. It does have a SOAP web service that website vendors and marketplaces already use, and that's where tracking connects.
- 1
Reservation calls with source fields
The documented ReservationNewWithSource operation accepts a source, a free-text tracking code, a caller ID and a comment, plus the reservation's expiry date and quoted rate. Whether your website vendor fills the tracking code is the first thing we test.
- 2
Marketing source records
SiteLink stores a marketing source per tenant (MarketingSourcesRetrieve, TenantMarketingUpdate). It's a picklist ID someone chooses, not an ad click, so we use it to split channels and cross-check, never as proof.
- 3
Call tracking hooks
The API lists call tracking campaign operations and a phone-integration push for call data. Confirm whether your call tracking provider uses them.
- 4
Move-in and payment lists
MoveInOutList and payment operations expose completed rentals. No webhooks are listed, so move-ins are read on a schedule, not pushed.
- 5
Limited API users
Partners connect through a dedicated SiteLink user with API rights set up in the Corporate Control Center, so nobody needs your manager login.
SiteLink · diagnose
Where SiteLink tracking breaks, in the order we check
On a storage site the usual fault is that your ads are optimizing on the wrong event, so that's where we start.
- 01
Find the conversion Google Ads is bidding on
Reservation form, thank-you page or move-in. If it's the form, that explains most of the gap.
- 02
Identify who owns the rental flow
Storable website, Storagely, a custom API build, and whether the rental step stays on your domain.
- 03
Reserve a unit from an ad-tagged URL
Then open that reservation in SiteLink and look for the click ID or tracking code.
- 04
Audit the source on recent move-ins
Count blank or default marketing sources, and confirm SpareFoot rentals are identifiable.
- 05
Compare move-ins with reported conversions
SiteLink's closed month against Google Ads and Meta, by date and unit.
SiteLink · prove
The QA evidence — SiteLink
Run on a real reservation through your live facility website and a real move-in processed in SiteLink, not a demo corp code.
Source of truth
SiteLink reservation and move-in records: move-ins by date, unit, rent and marketing source, with marketplace reservations identified
- Reserve one unit from an ad link, then find its click ID on the reservation in SiteLink.
- The matching move-in received once by Google Ads and once by Meta, with a shared event ID.
- An expired reservation confirmed absent from the move-in conversion.
- A SpareFoot reservation confirmed excluded from ad conversions.
- A phone reservation from a tracked number matched to its call.
- Move-ins reconciled record by record across a closed month.
- Run again a month on, and whenever you switch website vendors or change the online rental checkout.
SiteLink · free audit
What we check in the free audit
- Find the conversion Google Ads is bidding on
- Identify who owns the rental flow
- Reserve a unit from an ad-tagged URL
- Audit the source on recent move-ins
- Compare move-ins with reported conversions
Checked against
SiteLink reservation and move-in records: move-ins by date, unit, rent and marketing source, with marketplace reservations identified
Free30 minutesNo obligation
SiteLink · when not to buy
When you don't need this on SiteLink
Plenty of storage operators are fine without it, and we'll say so on the call.
- If your facility is near full and ads are paused, fix this when you start spending again.
- If almost every rental comes from SpareFoot and drive-by traffic, ad attribution won't change much for you.
- If your marketing vendor already reports move-ins per campaign and those totals match SiteLink's move-in report, leave it.
- If your only problem is the reservation thank-you page counting twice, ask your web vendor to fix that; you don't need a rebuild.
SiteLink · what we deliver
The event map on SiteLink
Unit sizes and rates viewed
Website signal for remarketing, before anyone picks a unit.
Online reservation
Secondary conversion, with the click ID and UTMs written to the SiteLink reservation record.
Tracked rental call
Matched to the reservation the manager creates, by caller ID where your call tracking provider supplies it.
Move-in completed
The primary conversion, read from SiteLink and valued from the unit's rent.
Reservation expired or cancelled
Kept out of the move-in count; early move-outs are flagged for adjustment where the platform allows it.
Excluded on purpose
SpareFoot marketplace reservations, unit transfers, and payments from tenants already renting.
Written guarantee
95%+ tracking accuracy
Measured against SiteLink reservation and move-in records: move-ins by date, unit, rent and marketing source, with marketplace reservations identified. Miss it and we keep working at no cost.
From $400 · See packages
FAQ
SiteLink questions, answered
Not in anything SiteLink documents. Ad tracking runs through your facility website and a server-side build that reads rentals from SiteLink's API.
Move-ins. A reservation holds a unit and can lapse; a move-in is rent. Keep reservations as a secondary signal so campaigns still get feedback while volume is low.
Yes, if your call tracking passes the click and the manager's reservation can be matched to the call. SiteLink's API lists call tracking operations, and we confirm which ones your provider uses.
They shouldn't. SpareFoot's help says its reservations appear in your normal SiteLink reservation list, so we confirm how they're marked on your account and exclude them before anything reaches Google or Meta.
Both post rentals into SiteLink. The difference is whether the click ID travels with the reservation, so we prove it with a live test before anything else.
No. Integrations use a dedicated SiteLink user with API rights, created in your Corporate Control Center, that you set up and control.
More on SiteLink
- Enhanced ConversionsEnhanced Conversions enrich the conversions that already fire. First we make sur…
- Meta CAPIA one-click CAPI integration sends thin events. That's why your Event Match Qual…
- Cross-Domain TrackingYour checkout provider is the best performing traffic source in your GA4 account…
RELATED GUIDES
Booking tools beside SiteLink, and what their bookings feed
- FormFoxConversion tracking for FormFox: your ads win the employer, the collection shows up in Workforce days later
- CleanCloudCleanCloud pickup orders not showing in Google Ads? Here's the fix.
- Golf GeniusGolf Genius conversion tracking: your events fill up, so why do your ads show zero entries?
- Drive ScoutConversion tracking for Drive Scout
- DockMasterDockMaster conversion tracking: your ads ring the dock office, but which ones actually fill slips and sell boats?
- BakeSmartYour BakeSmart store is full of cake orders, but Google Ads says your ads sold nothing
- RentMyRentMy conversion tracking that shows which ads book rentals
- MoovsRiders book limo and charter trips in Moovs. Your ads can't see which ones.
Free · 30 min
Find out which ads fill your units
Free30 minutesNo obligation
