GoCardless → Impact · Conversion tracking
Connecting GoCardless to Impact.com
GoCardless is bank debit rather than card, which changes everything about timing — a mandate is set up now and money moves days later, repeatedly. Impact is the first destination on this site that pays somebody for the conversion you send it, which changes the stakes completely: an event that is wrong here does not distort a report, it produces a payment. The join between them succeeds or fails on one thing: whether the Impact click identifier, irclickid reaches the GoCardless mandate before the conversion happens, because Impact can only match a conversion it can tie back to a click it recognizes.
✓ 30-minute call · No commitment · You leave with a written remediation plan even if we’re not the right fit.
Written guarantee
95%+ conversion accuracy on GoCardless → Impact
Measured against your own order records at handover. Miss it and we keep working at no cost until it’s met.
Built on — and certified for — the platforms that matter
Stape
Pro Partner
Meta
Tech Provider
Tag Manager
TikTok
Events API
Microsoft
UET Partner
CAPI Partner
CAPI Partner
Built on the same partner stack used by enterprise DTC brands.
By the numbers
No fake testimonials.Just the math.
70+
Platforms supported
Shopify · Woo · Magento · BigCommerce · 65 more
8+ / 10
Meta EMQ guaranteed
in writing — keep working free until hit
2–4d
Build to live
accurate data flowing within 7 days
$0
Monthly fees, ever
one-time fixed price · you own the stack
400d
Cookie lifetime
max RFC 6265bis allows · 57× Safari ITP
9
Ad channels covered
Meta · Google · TikTok · MS · LI · Pin · Snap · Reddit · X
95%+
Tracking accuracy
verified vs Stripe · GA4 · ad-platform reports
30 min
Free founder call
no SDR · no pitch deck · written remediation plan
Every figure above is either a commitment we put in writing or a countable fact. What your own setup is losing is not on this list, because we haven’t measured it yet — that happens on the call, against your own order records.
Real clients · real videos · real outcomes
Don’t take our word for it. Watch the receipts.
Founders, marketers, and agency owners describing the before-and-after of their GoCardless → Impact tracking rebuild — in their own words, on camera.
Why this join usually fails
The Impact click identifier, irclickid never reaches GoCardless
The single most common cause. Bank debit has a mandatory notice period and a settlement lag measured in days, so the money event is always well after the click. The identifier must live on the mandate, because every subsequent payment references it rather than a browser session.
Days between the signup and the money
Bank debit is not instant. The mandate is agreed today and the first collection clears later, which puts every naive page-based conversion at the wrong moment and the wrong value.
A second party claiming a conversion your ads already paid for
This is the structural problem with every affiliate and partnership platform. A customer clicks a paid ad, browses, later clicks a partner link for a discount code, and buys. Google reports a conversion, Impact commissions a partner, and you paid twice for one order. Neither system is wrong on its own terms — but nothing reconciles them unless you do.
Nothing reconciles afterwards
An upload that succeeds is not an upload that matched. Impact shows the conversion in its reporting with the attributed partner and the commission. Check that the order ID matches your own record and that the value is net of what you actually keep, not the gross basket.
Architecture
How GoCardless and Impact actually connect
Two systems that know nothing about each other. Everything below exists to give them one shared reference.
Step 1
GoCardless holds the truth
The mandate is the acquisition; each payment is a collection against it. A subscription business on direct debit should value the mandate, not the first collection.
Step 2
Impact.com needs a click to match
Impact needs the click identifier, an order identifier and the order value to attribute and commission the conversion. Without the click identifier it cannot tell which partner to pay.
Step 3
The identifier is the bridge
The Impact click identifier, irclickid, captured at the visit and carried into the GoCardless mandate. Without it there is nothing to join on and no tool fixes that.
Step 4
The event source decides reliability
Send the mandate setup as acquisition at expected lifetime value, and treat individual collections as reporting rather than as new conversions.
Step 5
Deduplication at the destination
Impact deduplicates on your order identifier, so the same order sent twice will not commission twice — provided you send a stable order ID. Send a new ID for a retry and you have paid a partner twice for one sale.
Diagnose it honestly
Working vs. broken, side by side
Both states look identical from the Impact dashboard, which is why this runs for months before anyone notices.
Normal — not a fault
The Impact click identifier, irclickid present on the mandate
Visible on the record itself in GoCardless, not merely captured somewhere on the site.
Sent from the GoCardless payment confirmed webhook
Server-side, so it does not depend on the customer's browser still being there.
Deduplicated correctly
Impact deduplicates on your order identifier, so the same order sent twice will not commission twice — provided you send a stable order ID. Send a new ID for a retry and you have paid a partner twice for one sale.
Reconciles with the source
Impact's count and GoCardless's records agree within a few percent over a closed window.
Actually broken
The Impact click identifier, irclickid missing on most records
Bank debit has a mandatory notice period and a settlement lag measured in days, so the money event is always well after the click. The identifier must live on the mandate, because every subsequent payment references it rather than a browser session.
Sent from the browser
Anyone who closes the tab, blocks the script or converts without a page load is invisible. Bank debit is not instant. The mandate is agreed today and the first collection clears later, which puts every naive page-based conversion at the wrong moment and the wrong value.
Counted twice, or not at all
This is the structural problem with every affiliate and partnership platform. A customer clicks a paid ad, browses, later clicks a partner link for a discount code, and buys. Google reports a conversion, Impact commissions a partner, and you paid twice for one order. Neither system is wrong on its own terms — but nothing reconciles them unless you do.
Nobody has reconciled it
The dashboard shows a number and no one has compared it to GoCardless. A wrong number that nobody checks is indistinguishable from a right one.
Diagnostic sequence
Diagnostic order
Each step rules out a class of cause. Run them in order and the last one usually has a single explanation standing.
- 1
Count mandates carrying the Impact click identifier, irclickid
The ceiling on everything else. Do this before debugging anything downstream.
- 2
Follow one real conversion end to end
From the ad click through GoCardless and into Impact.
- 3
Check whether the identifier is on the mandate or only the first payment
If it is on the payment, no later collection can be attributed — and later collections are most of the revenue.
- 4
Count orders that appear in both your ad platforms and Impact
The overlap is what you are paying for twice. It is a single query against order IDs and it is almost never run.
- 5
Read the match rate, not the success message
Impact shows the conversion in its reporting with the attributed partner and the commission. Check that the order ID matches your own record and that the value is net of what you actually keep, not the gross basket.
Source-of-truth validation
How it gets proven
Against GoCardless's own records, not against either platform's dashboard.
- The Impact click identifier, irclickid confirmed present on a live mandate.
- A real conversion followed from click through GoCardless to Impact.
- Conversions in Impact reconciled per order ID against your own order records, with the ad-platform overlap measured and stated.
- A collection weeks after setup confirmed traceable to the original mandate and click.
- Reconciled over a fully closed window, matched per record rather than on totals.
- Re-checked 30 days later.
Straight talk
When you don't need this
Worth reading before paying anyone, including us.
- If Impact already reports conversions that reconcile against GoCardless's records within a few percent, this join is working and there is nothing to buy.
- Measure identifier coverage yourself first — pull your last hundred mandates and count how many carry the Impact click identifier, irclickid. Ten minutes, free, and it tells you whether any of this is worth doing.
- If you take one-off bank payments with no mandate, this reduces to a much simpler integration.
- If you have no partner programme, there is nothing to send here. If you have one and are not reconciling the overlap with paid media, that reconciliation is worth more than any tracking build.
Who this is for
Honest about who we’re a fit for.
We don’t take every project. Here’s how to tell if we’re right for you.
You’re a great fit if…
- You run GoCardless → Impact (or are migrating to it)
- You spend $5K+/month on paid ads (Meta, Google, TikTok, Microsoft, LinkedIn)
- Your reported ROAS doesn’t match what your bank account is saying
- You want to own your tracking stack — no monthly SaaS fees forever
- You have 2–4 days to do this once and never think about it again
Skip us if…
- You spend less than $500/month on paid ads (browser pixel is fine)
- You want a SaaS dashboard with monthly fees forever (Triple Whale, Hyros)
- You need attribution modeling — we fix the data foundation, not multi-touch reports
- You want a 6-month enterprise consulting engagement (we ship in 4 days)
- You expect us to manage your ad accounts (we don’t — that’s a different service)
If you’re still unsure,book the call anyway— we’ll tell you straight whether we can help.
What working looks like
The Impact click identifier, irclickid on every mandate
Server-sideCaptured before the conversion and stored where it survives.
Conversions arriving in Impact
8+ EMQThe conversion is attributed to a partner, held for your review or approval period, and then commissioned.
Reconciled against the source
DedupedGoCardless's own records are the reference, not either dashboard.
What gets built
Identifier capture into GoCardless
Pass the click identifier into the mandate's metadata at setup, so all future collections trace back to the campaign that acquired the customer.
Event source: the GoCardless payment confirmed webhook
Send the mandate setup as acquisition at expected lifetime value, and treat individual collections as reporting rather than as new conversions.
Dispatch to Impact
The Impact Conversions API, posted server-side from your order system with the click identifier, order ID and value.
Reversals where they exist
Failed collections, chargebacks and cancelled mandates all exist and all should reduce the reported value.
Pick the package that fits your ad spend
Fixed-fee, no surprises. If your ad spend is meaningful,server-side tracking is what we recommend— it’s the only setup that survives iOS, Safari ITP and ad blockers.
Browser-side starter
Wires the join and verifies it on a live conversion. Honest about its ceiling where the source can only be read from the browser.
- The join built and tested end to end
- Verified on a real conversion
- Reconciled against the source's own records
- Written handover
1st-party server-side
Save $18K–$120K over 5 years vs Triple Whale / Hyros
The join built server-side from the source's own records, so it does not depend on a browser being present when the conversion happens.
- Events sourced from the system of record, not the browser
- Identifier captured and persisted end to end
- Deduplicated at the destination
- Reversals wired where the source supports them
- 95%+ accuracy guaranteed in writing
Full 1st-party stack
Every destination fed from one place, plus monitoring so a broken join surfaces in days rather than at quarter end.
- Everything in 1st-party server-side
- All paid destinations from one container
- CRM and offline loop
- Refunds and cancellations reversed everywhere
- Monitoring per destination
Not sure which tier fits?Book a 30-min scoping call— we’ll tell you straight, no upsell pressure.
How it works
Built in 2–4 days. Accurate data within 7.
We deliver the entire 1st-party server-side stack in 2–4 business days. You start collecting accurate, deduped conversion data the moment it goes live — and within 7 days every signal is flowing cleanly to Meta, Google, TikTok and the rest.
Kickoff + audit
30-min call. We map your current pixels, GTM, dataLayer, consent setup, and ad-platform integrations. You get a written report of every leak.
Build the stack
Server-side GTM container deployed on your subdomain. Meta CAPI · Google EC · TikTok Events API · Microsoft UET wired. Identity match + dedup configured.
QA + go-live
Live-fire test purchases across every funnel step. Meta EMQ verified at 8+. Tag Assistant + Pixel Helper passes. Side-by-side report delivered.
Verify accuracy
Your data flows clean. Within 7 days every signal — Meta, Google, TikTok, Microsoft — is fully accurate. Notion runbook + Loom walkthrough handoff.
Got questions?
The honestanswers.
No buzzwords, no upsell. If we don’t know, we say so.
01Why aren't my GoCardless conversions showing in Impact?
Almost always because the Impact click identifier, irclickid never reached the GoCardless mandate. Bank debit has a mandatory notice period and a settlement lag measured in days, so the money event is always well after the click. The identifier must live on the mandate, because every subsequent payment references it rather than a browser session. Measure coverage before debugging the dispatch.
02What identifier does Impact need?
Impact appends irclickid to the landing URL when a partner sends traffic. It identifies which partner earns the commission, so losing it does not degrade a report — it means a partner who genuinely drove the sale goes unpaid, and eventually raises a dispute you cannot answer.
03Where should the event come from?
The GoCardless payment confirmed webhook. Send the mandate setup as acquisition at expected lifetime value, and treat individual collections as reporting rather than as new conversions.
04How do I know it worked?
Impact shows the conversion in its reporting with the attributed partner and the commission. Check that the order ID matches your own record and that the value is net of what you actually keep, not the gross basket.
Still have questions?Book a 30-min call— bring them all.
The call
What happens on your free 30-min call
No pitch deck, no SDR, no upsell pressure. Founder-led. Bring your ad-platform screens and yourGoCardless → Impact setup — we’ll work through it together.
Min 1–5
We get the lay of your store
What you sell, what you spend on ads, who handles dev. Quick context-gathering — no questionnaire upfront.
Min 5–15
We audit your tracking live
Screen-share. We open your Meta Events Manager, GTM, and ad reports. You see exactly which conversions are leaking.
Min 15–25
We map a fix
What needs rebuilding, what stays. The exact GoCardless → Impact setup we'd ship and what it would recover for you.
Min 25–30
Decide. Or don’t.
If we're a fit, we send a 1-page proposal in writing. If not, you walk away with a free remediation plan you can hand to anyone.
Get GoCardless and Impact joined properly
Book a free 30-minute call. We measure your identifier coverage live on your own account, and you leave with a written plan — including the option that you don't need us.
Free · 30-min consultation · No commitment · Replies in under 2 hours · Available worldwide via WhatsApp
95% tracking accuracy guarantee
Free 30-min consultation · from $400 · 1st-party server-side
95% guarantee · from $400
