Workiz → Google Ads · Conversion tracking
Connecting Workiz to Google Ads
Workiz is built for phone-heavy trades — locksmiths, garage doors, junk removal — where the call is the funnel and the website is a phone number with pictures around it. Google Ads knows what you spent and which click it came from, and nothing at all about what happened afterwards. The join between them succeeds or fails on one thing: whether the GCLID reaches the Workiz job before the conversion happens, because Google Ads can only match a conversion it can tie back to a click it recognizes.
✓ 30-minute call · No commitment · You leave with a written remediation plan even if we’re not the right fit.
Written guarantee
95%+ conversion accuracy on Workiz → Google Ads
Measured against your own order records at handover. Miss it and we keep working at no cost until it’s met.
Built on — and certified for — the platforms that matter
Stape
Pro Partner
Meta
Tech Provider
Tag Manager
TikTok
Events API
Microsoft
UET Partner
CAPI Partner
CAPI Partner
Built on the same partner stack used by enterprise DTC brands.
By the numbers
No fake testimonials.Just the math.
70+
Platforms supported
Shopify · Woo · Magento · BigCommerce · 65 more
8+ / 10
Meta EMQ guaranteed
in writing — keep working free until hit
2–4d
Build to live
accurate data flowing within 7 days
$0
Monthly fees, ever
one-time fixed price · you own the stack
400d
Cookie lifetime
max RFC 6265bis allows · 57× Safari ITP
9
Ad channels covered
Meta · Google · TikTok · MS · LI · Pin · Snap · Reddit · X
95%+
Tracking accuracy
verified vs Stripe · GA4 · ad-platform reports
30 min
Free founder call
no SDR · no pitch deck · written remediation plan
Every figure above is either a commitment we put in writing or a countable fact. What your own setup is losing is not on this list, because we haven’t measured it yet — that happens on the call, against your own order records.
Real clients · real videos · real outcomes
Don’t take our word for it. Watch the receipts.
Founders, marketers, and agency owners describing the before-and-after of their Workiz → Google Ads tracking rebuild — in their own words, on camera.
Why this join usually fails
The GCLID never reaches Workiz
The single most common cause. The session that led to the call lasts seconds and ends when the phone app opens. Only number insertion bridges it.
Calls counted instead of jobs
Wrong numbers, price checks, existing customers and suppliers all ring the same line. In emergency trades the call-to-job rate can be well under half, and it differs by campaign.
The conversion action is the wrong type
Uploads against a standard website conversion action fail. The action has to be created as 'Import' — and existing actions cannot be converted, so this is discovered late and requires starting a new action with no history.
Nothing reconciles afterwards
An upload that succeeds is not an upload that matched. Google Ads reports uploads in Goals → Conversions → Uploads, with rows accepted and rows failed. A green result means the file parsed, not that the clicks matched. The number to watch is how many conversions actually appear against campaigns afterwards.
Architecture
How Workiz and Google Ads actually connect
Two systems that know nothing about each other. Everything below exists to give them one shared reference.
Step 1
Workiz holds the truth
The call recording and the job are already linked inside Workiz. What is usually missing is the link from the call back to the campaign that produced it.
Step 2
Google Ads needs a click to match
Google Ads matches an uploaded conversion back to a click using the GCLID. The conversion action must be created as an import type — an upload against a website-tag conversion action is rejected. Uploads must also land inside Google's window: the click has to be within the last 90 days.
Step 3
The identifier is the bridge
The GCLID, captured at the visit and carried into the Workiz job. Without it there is nothing to join on and no tool fixes that.
Step 4
The event source decides reliability
Send jobs marked done and paid, at the collected amount.
Step 5
Deduplication at the destination
Google deduplicates on the combination of GCLID, conversion action and conversion time. Uploading the same click twice against the same action at the same timestamp is rejected rather than double-counted, but uploading it against a second conversion action counts twice — which is how most double-counting here actually happens.
Diagnose it honestly
Working vs. broken, side by side
Both states look identical from the Google Ads dashboard, which is why this runs for months before anyone notices.
Normal — not a fault
The GCLID present on the job
Visible on the record itself in Workiz, not merely captured somewhere on the site.
Sent from the Workiz job record
Server-side, so it does not depend on the customer's browser still being there.
Deduplicated correctly
Google deduplicates on the combination of GCLID, conversion action and conversion time. Uploading the same click twice against the same action at the same timestamp is rejected rather than double-counted, but uploading it against a second conversion action counts twice — which is how most double-counting here actually happens.
Reconciles with the source
Google Ads's count and Workiz's records agree within a few percent over a closed window.
Actually broken
The GCLID missing on most records
The session that led to the call lasts seconds and ends when the phone app opens. Only number insertion bridges it.
Sent from the browser
Anyone who closes the tab, blocks the script or converts without a page load is invisible. Wrong numbers, price checks, existing customers and suppliers all ring the same line. In emergency trades the call-to-job rate can be well under half, and it differs by campaign.
Counted twice, or not at all
Uploads against a standard website conversion action fail. The action has to be created as 'Import' — and existing actions cannot be converted, so this is discovered late and requires starting a new action with no history.
Nobody has reconciled it
The dashboard shows a number and no one has compared it to Workiz. A wrong number that nobody checks is indistinguishable from a right one.
Diagnostic sequence
Diagnostic order
Each step rules out a class of cause. Run them in order and the last one usually has a single explanation standing.
- 1
Count jobs carrying the GCLID
The ceiling on everything else. Do this before debugging anything downstream.
- 2
Follow one real conversion end to end
From the ad click through Workiz and into Google Ads.
- 3
Measure call-to-job rate per campaign
It is the multiplier between what you are reporting and what you are earning, and it is rarely the same across sources.
- 4
Check the conversion action type and the upload diagnostics
In Google Ads, Goals → Conversions → Uploads shows every upload with its error rows. Read the errors rather than the success count; a file can import successfully with most rows rejected.
- 5
Read the match rate, not the success message
Google Ads reports uploads in Goals → Conversions → Uploads, with rows accepted and rows failed. A green result means the file parsed, not that the clicks matched. The number to watch is how many conversions actually appear against campaigns afterwards.
Source-of-truth validation
How it gets proven
Against Workiz's own records, not against either platform's dashboard.
- The GCLID confirmed present on a live job.
- A real conversion followed from click through Workiz to Google Ads.
- The Uploads diagnostics read row by row, with the accepted count reconciled against conversions appearing in campaign reporting.
- Paid completed jobs reconciled against imported conversions, with raw call volume reported separately.
- Reconciled over a fully closed window, matched per record rather than on totals.
- Re-checked 30 days later.
Straight talk
When you don't need this
Worth reading before paying anyone, including us.
- If Google Ads already reports conversions that reconcile against Workiz's records within a few percent, this join is working and there is nothing to buy.
- Measure identifier coverage yourself first — pull your last hundred jobs and count how many carry the GCLID. Ten minutes, free, and it tells you whether any of this is worth doing.
- If you already answer every call and convert nearly all of them, call volume is a fine proxy and the join is not worth building.
- If your sales close inside a few days and your website tag already reports accurately, you may not need offline import at all. It exists to solve the delay between click and revenue.
Who this is for
Honest about who we’re a fit for.
We don’t take every project. Here’s how to tell if we’re right for you.
You’re a great fit if…
- You run Workiz → Google Ads (or are migrating to it)
- You spend $5K+/month on paid ads (Meta, Google, TikTok, Microsoft, LinkedIn)
- Your reported ROAS doesn’t match what your bank account is saying
- You want to own your tracking stack — no monthly SaaS fees forever
- You have 2–4 days to do this once and never think about it again
Skip us if…
- You spend less than $500/month on paid ads (browser pixel is fine)
- You want a SaaS dashboard with monthly fees forever (Triple Whale, Hyros)
- You need attribution modeling — we fix the data foundation, not multi-touch reports
- You want a 6-month enterprise consulting engagement (we ship in 4 days)
- You expect us to manage your ad accounts (we don’t — that’s a different service)
If you’re still unsure,book the call anyway— we’ll tell you straight whether we can help.
What working looks like
The GCLID on every job
Server-sideCaptured before the conversion and stored where it survives.
Conversions arriving in Google Ads
8+ EMQConversions appear against the campaign, ad group and keyword that produced the click, with the value you sent — which is what lets Smart Bidding optimize toward revenue instead of toward form fills.
Reconciled against the source
DedupedWorkiz's own records are the reference, not either dashboard.
What gets built
Identifier capture into Workiz
Use dynamic number insertion with a pool large enough that numbers are not recycled within your booking window.
Event source: the Workiz job record
Send jobs marked done and paid, at the collected amount.
Dispatch to Google Ads
Offline Conversion Import through the Google Ads API, or a scheduled upload. Enhanced conversions for leads where GCLID coverage is poor and you have consented email addresses.
Reversals where they exist
Cancelled and unpaid jobs reverse.
Pick the package that fits your ad spend
Fixed-fee, no surprises. If your ad spend is meaningful,server-side tracking is what we recommend— it’s the only setup that survives iOS, Safari ITP and ad blockers.
Browser-side starter
Wires the join and verifies it on a live conversion. Honest about its ceiling where the source can only be read from the browser.
- The join built and tested end to end
- Verified on a real conversion
- Reconciled against the source's own records
- Written handover
1st-party server-side
Save $18K–$120K over 5 years vs Triple Whale / Hyros
The join built server-side from the source's own records, so it does not depend on a browser being present when the conversion happens.
- Events sourced from the system of record, not the browser
- Identifier captured and persisted end to end
- Deduplicated at the destination
- Reversals wired where the source supports them
- 95%+ accuracy guaranteed in writing
Full 1st-party stack
Every destination fed from one place, plus monitoring so a broken join surfaces in days rather than at quarter end.
- Everything in 1st-party server-side
- All paid destinations from one container
- CRM and offline loop
- Refunds and cancellations reversed everywhere
- Monitoring per destination
Not sure which tier fits?Book a 30-min scoping call— we’ll tell you straight, no upsell pressure.
How it works
Built in 2–4 days. Accurate data within 7.
We deliver the entire 1st-party server-side stack in 2–4 business days. You start collecting accurate, deduped conversion data the moment it goes live — and within 7 days every signal is flowing cleanly to Meta, Google, TikTok and the rest.
Kickoff + audit
30-min call. We map your current pixels, GTM, dataLayer, consent setup, and ad-platform integrations. You get a written report of every leak.
Build the stack
Server-side GTM container deployed on your subdomain. Meta CAPI · Google EC · TikTok Events API · Microsoft UET wired. Identity match + dedup configured.
QA + go-live
Live-fire test purchases across every funnel step. Meta EMQ verified at 8+. Tag Assistant + Pixel Helper passes. Side-by-side report delivered.
Verify accuracy
Your data flows clean. Within 7 days every signal — Meta, Google, TikTok, Microsoft — is fully accurate. Notion runbook + Loom walkthrough handoff.
Got questions?
The honestanswers.
No buzzwords, no upsell. If we don’t know, we say so.
01Why aren't my Workiz conversions showing in Google Ads?
Almost always because the GCLID never reached the Workiz job. The session that led to the call lasts seconds and ends when the phone app opens. Only number insertion bridges it. Measure coverage before debugging the dispatch.
02What identifier does Google Ads need?
The GCLID — the click ID Google appends to your landing page URL when auto-tagging is on. For iOS App campaigns and some Shopping traffic you will see GBRAID or WBRAID instead, and those behave differently: WBRAID cannot be used with user-provided data in the same way, and neither joins to an individual user. Enhanced conversions for leads is the alternative path, matching on hashed email or phone rather than a click ID, and it is the right choice when GCLID coverage is poor.
03Where should the event come from?
The Workiz job record. Send jobs marked done and paid, at the collected amount.
04How do I know it worked?
Google Ads reports uploads in Goals → Conversions → Uploads, with rows accepted and rows failed. A green result means the file parsed, not that the clicks matched. The number to watch is how many conversions actually appear against campaigns afterwards.
Still have questions?Book a 30-min call— bring them all.
The call
What happens on your free 30-min call
No pitch deck, no SDR, no upsell pressure. Founder-led. Bring your ad-platform screens and yourWorkiz → Google Ads setup — we’ll work through it together.
Min 1–5
We get the lay of your store
What you sell, what you spend on ads, who handles dev. Quick context-gathering — no questionnaire upfront.
Min 5–15
We audit your tracking live
Screen-share. We open your Meta Events Manager, GTM, and ad reports. You see exactly which conversions are leaking.
Min 15–25
We map a fix
What needs rebuilding, what stays. The exact Workiz → Google Ads setup we'd ship and what it would recover for you.
Min 25–30
Decide. Or don’t.
If we're a fit, we send a 1-page proposal in writing. If not, you walk away with a free remediation plan you can hand to anyone.
Get Workiz and Google Ads joined properly
Book a free 30-minute call. We measure your identifier coverage live on your own account, and you leave with a written plan — including the option that you don't need us.
Free · 30-min consultation · No commitment · Replies in under 2 hours · Available worldwide via WhatsApp
Using Workiz for bookings? How Workiz bookings get tracked end to end
95% tracking accuracy guarantee
Free 30-min consultation · from $400 · 1st-party server-side
95% guarantee · from $400
