Typeform → Meta · Conversion tracking
Connecting Typeform to Meta Conversions API
Typeform holds the response, and for qualification-led funnels the answers inside it decide whether the lead was worth anything. Meta's pixel loses a large share of conversions to Safari, ad blockers and iOS, and the Conversions API exists because of it. The join between them succeeds or fails on one thing: whether the fbc and fbp values reaches the Typeform response before the conversion happens, because Meta can only match a conversion it can tie back to a click it recognizes.
✓ 30-minute call · No commitment · You leave with a written remediation plan even if we’re not the right fit.
Written guarantee
95%+ conversion accuracy on Typeform → Meta
Measured against your own order records at handover. Miss it and we keep working at no cost until it’s met.
Built on — and certified for — the platforms that matter
Stape
Pro Partner
Meta
Tech Provider
Tag Manager
TikTok
Events API
Microsoft
UET Partner
CAPI Partner
CAPI Partner
Built on the same partner stack used by enterprise DTC brands.
By the numbers
No fake testimonials.Just the math.
70+
Platforms supported
Shopify · Woo · Magento · BigCommerce · 65 more
8+ / 10
Meta EMQ guaranteed
in writing — keep working free until hit
2–4d
Build to live
accurate data flowing within 7 days
$0
Monthly fees, ever
one-time fixed price · you own the stack
400d
Cookie lifetime
max RFC 6265bis allows · 57× Safari ITP
9
Ad channels covered
Meta · Google · TikTok · MS · LI · Pin · Snap · Reddit · X
95%+
Tracking accuracy
verified vs Stripe · GA4 · ad-platform reports
30 min
Free founder call
no SDR · no pitch deck · written remediation plan
Every figure above is either a commitment we put in writing or a countable fact. What your own setup is losing is not on this list, because we haven’t measured it yet — that happens on the call, against your own order records.
Real clients · real videos · real outcomes
Don’t take our word for it. Watch the receipts.
Founders, marketers, and agency owners describing the before-and-after of their Typeform → Meta tracking rebuild — in their own words, on camera.
Why this join usually fails
The fbc and fbp values never reaches Typeform
The single most common cause. Typeform hidden fields only populate if the identifier is on the form URL. Embedded forms need the parameter passed through the embed configuration, and a form linked from an email or a QR code has no identifier at all and never will.
Partial responses and unqualified submissions both look like leads
Typeform's completion rates are good, which makes it easy to send everything. Sending everything teaches the platform to find form-fillers.
Double counting from broken deduplication
Server and browser both fire, the event_id does not match, and Meta counts two purchases. Reported ROAS goes up, the business does not, and it can run for months before anyone reconciles against the store.
Nothing reconciles afterwards
An upload that succeeds is not an upload that matched. Events Manager shows received events, the deduplication state and an Event Match Quality score per event. Events arriving is not the test — deduplicated, well-matched events arriving is. Compare Meta's reported purchases against your store's order count for the same window.
Architecture
How Typeform and Meta actually connect
Two systems that know nothing about each other. Everything below exists to give them one shared reference.
Step 1
Typeform holds the truth
The response carries every answer plus any hidden fields. The answers matter: a form that asks budget or timeline lets you send a qualified conversion instead of a raw submission, which is the single highest-leverage thing available on this integration.
Step 2
Meta Conversions API needs a click to match
Meta matches server events to people using whatever identifiers you send, hashed with SHA-256 where required. There is no single mandatory key, which is why quality varies so much between implementations — a poorly matched event is accepted, reported, and worth much less than it appears.
Step 3
The identifier is the bridge
The fbc and fbp values, captured at the visit and carried into the Typeform response. Without it there is nothing to join on and no tool fixes that.
Step 4
The event source decides reliability
Send from your server when the response arrives, and read the answers so you can filter or value the conversion rather than counting every submission the same.
Step 5
Deduplication at the destination
Meta deduplicates on the pair of event_name and event_id. The browser pixel and the server event must send the same event_id for the same conversion, within the deduplication window. Get this wrong and every purchase counts twice — which is by far the most common Conversions API failure and it inflates reported ROAS rather than reducing it.
Diagnose it honestly
Working vs. broken, side by side
Both states look identical from the Meta dashboard, which is why this runs for months before anyone notices.
Normal — not a fault
The fbc and fbp values present on the response
Visible on the record itself in Typeform, not merely captured somewhere on the site.
Sent from the Typeform webhook on form_response
Server-side, so it does not depend on the customer's browser still being there.
Deduplicated correctly
Meta deduplicates on the pair of event_name and event_id. The browser pixel and the server event must send the same event_id for the same conversion, within the deduplication window. Get this wrong and every purchase counts twice — which is by far the most common Conversions API failure and it inflates reported ROAS rather than reducing it.
Reconciles with the source
Meta's count and Typeform's records agree within a few percent over a closed window.
Actually broken
The fbc and fbp values missing on most records
Typeform hidden fields only populate if the identifier is on the form URL. Embedded forms need the parameter passed through the embed configuration, and a form linked from an email or a QR code has no identifier at all and never will.
Sent from the browser
Anyone who closes the tab, blocks the script or converts without a page load is invisible. Typeform's completion rates are good, which makes it easy to send everything. Sending everything teaches the platform to find form-fillers.
Counted twice, or not at all
Server and browser both fire, the event_id does not match, and Meta counts two purchases. Reported ROAS goes up, the business does not, and it can run for months before anyone reconciles against the store.
Nobody has reconciled it
The dashboard shows a number and no one has compared it to Typeform. A wrong number that nobody checks is indistinguishable from a right one.
Diagnostic sequence
Diagnostic order
Each step rules out a class of cause. Run them in order and the last one usually has a single explanation standing.
- 1
Count responses carrying the fbc and fbp values
The ceiling on everything else. Do this before debugging anything downstream.
- 2
Follow one real conversion end to end
From the ad click through Typeform and into Meta.
- 3
Open a recent response and check the hidden fields
Empty hidden fields mean the URL is not carrying them. Check the embed configuration separately from the direct link — they fail independently.
- 4
Read Event Match Quality and the deduplication indicator
In Events Manager, open the event and check both. A low match quality means weak identifiers; a missing deduplication indicator means your event_id pairing is broken.
- 5
Read the match rate, not the success message
Events Manager shows received events, the deduplication state and an Event Match Quality score per event. Events arriving is not the test — deduplicated, well-matched events arriving is. Compare Meta's reported purchases against your store's order count for the same window.
Source-of-truth validation
How it gets proven
Against Typeform's own records, not against either platform's dashboard.
- The fbc and fbp values confirmed present on a live response.
- A real conversion followed from click through Typeform to Meta.
- Deduplication confirmed in Events Manager on a real purchase, with the browser and server events visibly paired rather than counted twice.
- Qualification logic confirmed to run before the send, on a response that should not have counted.
- Reconciled over a fully closed window, matched per record rather than on totals.
- Re-checked 30 days later.
Straight talk
When you don't need this
Worth reading before paying anyone, including us.
- If Meta already reports conversions that reconcile against Typeform's records within a few percent, this join is working and there is nothing to buy.
- Measure identifier coverage yourself first — pull your last hundred responses and count how many carry the fbc and fbp values. Ten minutes, free, and it tells you whether any of this is worth doing.
- If you use Typeform for a single low-volume form, the native integrations will do. This is worth building when the answers should change what you send.
- If you are not running Meta ads at meaningful spend, the Conversions API is effort without payoff. It earns its cost when the optimization signal is worth improving.
Who this is for
Honest about who we’re a fit for.
We don’t take every project. Here’s how to tell if we’re right for you.
You’re a great fit if…
- You run Typeform → Meta (or are migrating to it)
- You spend $5K+/month on paid ads (Meta, Google, TikTok, Microsoft, LinkedIn)
- Your reported ROAS doesn’t match what your bank account is saying
- You want to own your tracking stack — no monthly SaaS fees forever
- You have 2–4 days to do this once and never think about it again
Skip us if…
- You spend less than $500/month on paid ads (browser pixel is fine)
- You want a SaaS dashboard with monthly fees forever (Triple Whale, Hyros)
- You need attribution modeling — we fix the data foundation, not multi-touch reports
- You want a 6-month enterprise consulting engagement (we ship in 4 days)
- You expect us to manage your ad accounts (we don’t — that’s a different service)
If you’re still unsure,book the call anyway— we’ll tell you straight whether we can help.
What working looks like
The fbc and fbp values on every response
Server-sideCaptured before the conversion and stored where it survives.
Conversions arriving in Meta
8+ EMQEvents appear in Events Manager with an Event Match Quality score, deduplicated against the pixel, and become usable for optimization and attribution.
Reconciled against the source
DedupedTypeform's own records are the reference, not either dashboard.
What gets built
Identifier capture into Typeform
Define hidden fields on the form, append them to the URL or set them in the embed options, and confirm they appear on submitted responses rather than only in the preview.
Event source: the Typeform webhook on form_response
Send from your server when the response arrives, and read the answers so you can filter or value the conversion rather than counting every submission the same.
Dispatch to Meta
Server-side events to the Conversions API with the event_id matched to the pixel, action_source set correctly, and customer data hashed before it leaves your infrastructure.
Reversals where they exist
Nothing to reverse, but a response later disqualified should not have been sent — which is why the qualification logic belongs in the send.
Pick the package that fits your ad spend
Fixed-fee, no surprises. If your ad spend is meaningful,server-side tracking is what we recommend— it’s the only setup that survives iOS, Safari ITP and ad blockers.
Browser-side starter
Wires the join and verifies it on a live conversion. Honest about its ceiling where the source can only be read from the browser.
- The join built and tested end to end
- Verified on a real conversion
- Reconciled against the source's own records
- Written handover
1st-party server-side
Save $18K–$120K over 5 years vs Triple Whale / Hyros
The join built server-side from the source's own records, so it does not depend on a browser being present when the conversion happens.
- Events sourced from the system of record, not the browser
- Identifier captured and persisted end to end
- Deduplicated at the destination
- Reversals wired where the source supports them
- 95%+ accuracy guaranteed in writing
Full 1st-party stack
Every destination fed from one place, plus monitoring so a broken join surfaces in days rather than at quarter end.
- Everything in 1st-party server-side
- All paid destinations from one container
- CRM and offline loop
- Refunds and cancellations reversed everywhere
- Monitoring per destination
Not sure which tier fits?Book a 30-min scoping call— we’ll tell you straight, no upsell pressure.
How it works
Built in 2–4 days. Accurate data within 7.
We deliver the entire 1st-party server-side stack in 2–4 business days. You start collecting accurate, deduped conversion data the moment it goes live — and within 7 days every signal is flowing cleanly to Meta, Google, TikTok and the rest.
Kickoff + audit
30-min call. We map your current pixels, GTM, dataLayer, consent setup, and ad-platform integrations. You get a written report of every leak.
Build the stack
Server-side GTM container deployed on your subdomain. Meta CAPI · Google EC · TikTok Events API · Microsoft UET wired. Identity match + dedup configured.
QA + go-live
Live-fire test purchases across every funnel step. Meta EMQ verified at 8+. Tag Assistant + Pixel Helper passes. Side-by-side report delivered.
Verify accuracy
Your data flows clean. Within 7 days every signal — Meta, Google, TikTok, Microsoft — is fully accurate. Notion runbook + Loom walkthrough handoff.
Got questions?
The honestanswers.
No buzzwords, no upsell. If we don’t know, we say so.
01Why aren't my Typeform conversions showing in Meta?
Almost always because the fbc and fbp values never reached the Typeform response. Typeform hidden fields only populate if the identifier is on the form URL. Embedded forms need the parameter passed through the embed configuration, and a form linked from an email or a QR code has no identifier at all and never will. Measure coverage before debugging the dispatch.
02What identifier does Meta need?
Two things. The _fbc cookie, derived from the fbclid parameter on the landing URL in the format fb.1.<timestamp>.<fbclid>, is the click identifier. The _fbp cookie is the browser identifier. Beyond those, Meta matches on hashed customer information — email, phone, name, city, country — and every additional field raises the Event Match Quality score. Unlike Google, Meta does not need a click ID at all if the customer data is good, but match quality drops noticeably without it.
03Where should the event come from?
The Typeform webhook on form_response. Send from your server when the response arrives, and read the answers so you can filter or value the conversion rather than counting every submission the same.
04How do I know it worked?
Events Manager shows received events, the deduplication state and an Event Match Quality score per event. Events arriving is not the test — deduplicated, well-matched events arriving is. Compare Meta's reported purchases against your store's order count for the same window.
Still have questions?Book a 30-min call— bring them all.
The call
What happens on your free 30-min call
No pitch deck, no SDR, no upsell pressure. Founder-led. Bring your ad-platform screens and yourTypeform → Meta setup — we’ll work through it together.
Min 1–5
We get the lay of your store
What you sell, what you spend on ads, who handles dev. Quick context-gathering — no questionnaire upfront.
Min 5–15
We audit your tracking live
Screen-share. We open your Meta Events Manager, GTM, and ad reports. You see exactly which conversions are leaking.
Min 15–25
We map a fix
What needs rebuilding, what stays. The exact Typeform → Meta setup we'd ship and what it would recover for you.
Min 25–30
Decide. Or don’t.
If we're a fit, we send a 1-page proposal in writing. If not, you walk away with a free remediation plan you can hand to anyone.
Get Typeform and Meta joined properly
Book a free 30-minute call. We measure your identifier coverage live on your own account, and you leave with a written plan — including the option that you don't need us.
Free · 30-min consultation · No commitment · Replies in under 2 hours · Available worldwide via WhatsApp
95% tracking accuracy guarantee
Free 30-min consultation · from $400 · 1st-party server-side
95% guarantee · from $400
