Statamic → Braze · Conversion tracking
Connecting Statamic to Braze
Statamic is a flat-file CMS on Laravel, usually chosen by agencies for content sites where commerce is bolted on rather than central. Braze is mobile-first lifecycle messaging, which means it resolves to a user rather than to a click and its most valuable channels — push and in-app — exist nowhere near a browser. The join between them succeeds or fails on one thing: whether the Braze external user ID reaches the Statamic or Laravel order record before the conversion happens, because Braze can only match a conversion it can tie back to a click it recognizes.
✓ 30-minute call · No commitment · You leave with a written remediation plan even if we’re not the right fit.
Written guarantee
95%+ conversion accuracy on Statamic → Braze
Measured against your own order records at handover. Miss it and we keep working at no cost until it’s met.
Built on — and certified for — the platforms that matter
Stape
Pro Partner
Meta
Tech Provider
Tag Manager
TikTok
Events API
Microsoft
UET Partner
CAPI Partner
CAPI Partner
Built on the same partner stack used by enterprise DTC brands.
By the numbers
No fake testimonials.Just the math.
70+
Platforms supported
Shopify · Woo · Magento · BigCommerce · 65 more
8+ / 10
Meta EMQ guaranteed
in writing — keep working free until hit
2–4d
Build to live
accurate data flowing within 7 days
$0
Monthly fees, ever
one-time fixed price · you own the stack
400d
Cookie lifetime
max RFC 6265bis allows · 57× Safari ITP
9
Ad channels covered
Meta · Google · TikTok · MS · LI · Pin · Snap · Reddit · X
95%+
Tracking accuracy
verified vs Stripe · GA4 · ad-platform reports
30 min
Free founder call
no SDR · no pitch deck · written remediation plan
Every figure above is either a commitment we put in writing or a countable fact. What your own setup is losing is not on this list, because we haven’t measured it yet — that happens on the call, against your own order records.
Real clients · real videos · real outcomes
Don’t take our word for it. Watch the receipts.
Founders, marketers, and agency owners describing the before-and-after of their Statamic → Braze tracking rebuild — in their own words, on camera.
Why this join usually fails
The Braze external user ID never reaches Statamic
The single most common cause. Statamic's static caching serves pre-rendered files with no PHP execution at all, which means anything expecting server-side rendering per request simply does not run.
Static caching bypassing PHP entirely
Statamic's full static caching serves a file from disk. No PHP runs, so nothing dynamic happens — and this is invisible because the page looks perfect.
Duplicate events sending duplicate push notifications
A duplicate here is visible to your customer on their lock screen, twice, and the second one is the reason they turn push off permanently. This is a more expensive mistake than a double-counted conversion in an ad platform, because the damage is not recoverable.
Nothing reconciles afterwards
An upload that succeeds is not an upload that matched. Braze shows events on the user profile within moments. Check the profile, not the API response, and specifically check whether an anonymous device profile has been created alongside the real one.
Architecture
How Statamic and Braze actually connect
Two systems that know nothing about each other. Everything below exists to give them one shared reference.
Step 1
Statamic holds the truth
Because Statamic sits on Laravel, the commercial record is usually a database table your developers defined. That is the source of truth and it is fully under your control.
Step 2
Braze needs a click to match
Braze needs the external user ID and a well-named event with its properties. An event with no external ID lands on an anonymous device profile that may never merge with the real user.
Step 3
The identifier is the bridge
The Braze external user ID, captured at the visit and carried into the Statamic or Laravel order record. Without it there is nothing to join on and no tool fixes that.
Step 4
The event source decides reliability
Fire from the application event. Static caching means the template that rendered the page may never have executed anything.
Step 5
Deduplication at the destination
Braze does not deduplicate for you. A purchase sent from both your app SDK and your server produces two events, two campaign triggers and potentially two push notifications to a customer who bought once.
Diagnose it honestly
Working vs. broken, side by side
Both states look identical from the Braze dashboard, which is why this runs for months before anyone notices.
Normal — not a fault
The Braze external user ID present on the order
Visible on the record itself in Statamic, not merely captured somewhere on the site.
Sent from your Laravel application's order event
Server-side, so it does not depend on the customer's browser still being there.
Deduplicated correctly
Braze does not deduplicate for you. A purchase sent from both your app SDK and your server produces two events, two campaign triggers and potentially two push notifications to a customer who bought once.
Reconciles with the source
Braze's count and Statamic's records agree within a few percent over a closed window.
Actually broken
The Braze external user ID missing on most records
Statamic's static caching serves pre-rendered files with no PHP execution at all, which means anything expecting server-side rendering per request simply does not run.
Sent from the browser
Anyone who closes the tab, blocks the script or converts without a page load is invisible. Statamic's full static caching serves a file from disk. No PHP runs, so nothing dynamic happens — and this is invisible because the page looks perfect.
Counted twice, or not at all
A duplicate here is visible to your customer on their lock screen, twice, and the second one is the reason they turn push off permanently. This is a more expensive mistake than a double-counted conversion in an ad platform, because the damage is not recoverable.
Nobody has reconciled it
The dashboard shows a number and no one has compared it to Statamic. A wrong number that nobody checks is indistinguishable from a right one.
Diagnostic sequence
Diagnostic order
Each step rules out a class of cause. Run them in order and the last one usually has a single explanation standing.
- 1
Count orders carrying the Braze external user ID
The ceiling on everything else. Do this before debugging anything downstream.
- 2
Follow one real conversion end to end
From the ad click through Statamic and into Braze.
- 3
Check whether full static caching is enabled
If it is, any per-request logic in a template is not running and never was.
- 4
Send a test purchase and read the user profile's event stream
One event or two? Check whether the SDK is already sending the same event before adding a server source, and check that the external ID matches the signed-in user rather than creating a new profile.
- 5
Read the match rate, not the success message
Braze shows events on the user profile within moments. Check the profile, not the API response, and specifically check whether an anonymous device profile has been created alongside the real one.
Source-of-truth validation
How it gets proven
Against Statamic's own records, not against either platform's dashboard.
- The Braze external user ID confirmed present on a live order.
- A real conversion followed from click through Statamic to Braze.
- The user profile confirmed to show one event per conversion, with device and user profiles correctly merged.
- Order data confirmed persisted on a purchase made while full static caching was active.
- Reconciled over a fully closed window, matched per record rather than on totals.
- Re-checked 30 days later.
Straight talk
When you don't need this
Worth reading before paying anyone, including us.
- If Braze already reports conversions that reconcile against Statamic's records within a few percent, this join is working and there is nothing to buy.
- Measure identifier coverage yourself first — pull your last hundred orders and count how many carry the Braze external user ID. Ten minutes, free, and it tells you whether any of this is worth doing.
- If commerce lives in a separate system entirely, work there — Statamic is the content layer.
- If you have no mobile app and no push channel, Braze is a large piece of infrastructure for a job an email platform already does.
Who this is for
Honest about who we’re a fit for.
We don’t take every project. Here’s how to tell if we’re right for you.
You’re a great fit if…
- You run Statamic → Braze (or are migrating to it)
- You spend $5K+/month on paid ads (Meta, Google, TikTok, Microsoft, LinkedIn)
- Your reported ROAS doesn’t match what your bank account is saying
- You want to own your tracking stack — no monthly SaaS fees forever
- You have 2–4 days to do this once and never think about it again
Skip us if…
- You spend less than $500/month on paid ads (browser pixel is fine)
- You want a SaaS dashboard with monthly fees forever (Triple Whale, Hyros)
- You need attribution modeling — we fix the data foundation, not multi-touch reports
- You want a 6-month enterprise consulting engagement (we ship in 4 days)
- You expect us to manage your ad accounts (we don’t — that’s a different service)
If you’re still unsure,book the call anyway— we’ll tell you straight whether we can help.
What working looks like
The Braze external user ID on every order
Server-sideCaptured before the conversion and stored where it survives.
Conversions arriving in Braze
8+ EMQThe event lands on the user profile, triggers whatever campaigns depend on it, and becomes available for segmentation across push, email and in-app.
Reconciled against the source
DedupedStatamic's own records are the reference, not either dashboard.
What gets built
Identifier capture into Statamic
Capture the identifier and persist it through a Laravel event listener into your own order table, entirely outside the static cache path.
Event source: your Laravel application's order event
Fire from the application event. Static caching means the template that rendered the page may never have executed anything.
Dispatch to Braze
The Braze user track endpoint, posted server-side from your order or billing system with the external user ID and event properties.
Reversals where they exist
Whatever your application defines as a refund.
Pick the package that fits your ad spend
Fixed-fee, no surprises. If your ad spend is meaningful,server-side tracking is what we recommend— it’s the only setup that survives iOS, Safari ITP and ad blockers.
Browser-side starter
Wires the join and verifies it on a live conversion. Honest about its ceiling where the source can only be read from the browser.
- The join built and tested end to end
- Verified on a real conversion
- Reconciled against the source's own records
- Written handover
1st-party server-side
Save $18K–$120K over 5 years vs Triple Whale / Hyros
The join built server-side from the source's own records, so it does not depend on a browser being present when the conversion happens.
- Events sourced from the system of record, not the browser
- Identifier captured and persisted end to end
- Deduplicated at the destination
- Reversals wired where the source supports them
- 95%+ accuracy guaranteed in writing
Full 1st-party stack
Every destination fed from one place, plus monitoring so a broken join surfaces in days rather than at quarter end.
- Everything in 1st-party server-side
- All paid destinations from one container
- CRM and offline loop
- Refunds and cancellations reversed everywhere
- Monitoring per destination
Not sure which tier fits?Book a 30-min scoping call— we’ll tell you straight, no upsell pressure.
How it works
Built in 2–4 days. Accurate data within 7.
We deliver the entire 1st-party server-side stack in 2–4 business days. You start collecting accurate, deduped conversion data the moment it goes live — and within 7 days every signal is flowing cleanly to Meta, Google, TikTok and the rest.
Kickoff + audit
30-min call. We map your current pixels, GTM, dataLayer, consent setup, and ad-platform integrations. You get a written report of every leak.
Build the stack
Server-side GTM container deployed on your subdomain. Meta CAPI · Google EC · TikTok Events API · Microsoft UET wired. Identity match + dedup configured.
QA + go-live
Live-fire test purchases across every funnel step. Meta EMQ verified at 8+. Tag Assistant + Pixel Helper passes. Side-by-side report delivered.
Verify accuracy
Your data flows clean. Within 7 days every signal — Meta, Google, TikTok, Microsoft — is fully accurate. Notion runbook + Loom walkthrough handoff.
Got questions?
The honestanswers.
No buzzwords, no upsell. If we don’t know, we say so.
01Why aren't my Statamic conversions showing in Braze?
Almost always because the Braze external user ID never reached the Statamic or Laravel order record. Statamic's static caching serves pre-rendered files with no PHP execution at all, which means anything expecting server-side rendering per request simply does not run. Measure coverage before debugging the dispatch.
02What identifier does Braze need?
Braze identifies people by an external_id you assign, usually your own user ID, with anonymous device profiles merged in once a user signs in. There is no click identifier at all. Getting the external ID right is the entire integration; getting it wrong fragments one customer into several profiles who each receive the same campaign.
03Where should the event come from?
Your Laravel application's order event. Fire from the application event. Static caching means the template that rendered the page may never have executed anything.
04How do I know it worked?
Braze shows events on the user profile within moments. Check the profile, not the API response, and specifically check whether an anonymous device profile has been created alongside the real one.
Still have questions?Book a 30-min call— bring them all.
The call
What happens on your free 30-min call
No pitch deck, no SDR, no upsell pressure. Founder-led. Bring your ad-platform screens and yourStatamic → Braze setup — we’ll work through it together.
Min 1–5
We get the lay of your store
What you sell, what you spend on ads, who handles dev. Quick context-gathering — no questionnaire upfront.
Min 5–15
We audit your tracking live
Screen-share. We open your Meta Events Manager, GTM, and ad reports. You see exactly which conversions are leaking.
Min 15–25
We map a fix
What needs rebuilding, what stays. The exact Statamic → Braze setup we'd ship and what it would recover for you.
Min 25–30
Decide. Or don’t.
If we're a fit, we send a 1-page proposal in writing. If not, you walk away with a free remediation plan you can hand to anyone.
Get Statamic and Braze joined properly
Book a free 30-minute call. We measure your identifier coverage live on your own account, and you leave with a written plan — including the option that you don't need us.
Free · 30-min consultation · No commitment · Replies in under 2 hours · Available worldwide via WhatsApp
95% tracking accuracy guarantee
Free 30-min consultation · from $400 · 1st-party server-side
95% guarantee · from $400
